Construction Equipment

Used Kobelco SK50UR Mini Excavator
#6048- Kobelco SK50UR Mini Excavator- sn# YJ01631, 4615 hrs, NO AC, Rubber Tracks@80% 16", offset boom w/bucket, push blade, 77" wide

Used Case Mini Excavator
#6445- Case C36B-2TS Mini Excavator- sn# N9TN 62834, 2009, Yanmar 23.1 hp Diesel engine, 3 cyl. 3610 hrs, Cab w/ heat & air, 90% tracks, plumbed, 12" trench bucket, Max dig depth 10', 11'5" Dump height, blade w/good edge, 2 speed-(1st- 1.6 mph & 2nd 2.7 mph), 8554# operating weight

Coming Soon
#6300- Yanmar VIO15-2A Mini Excavator- sn# 27810B, 2005, 1.5 ton Mini- 3704#, 1598 hrs, 16" bkt, 3 ft stick, swing away boom, 6'11" dig depth, aux hyd, canopy, hyd extendable tracks- excellent, cold start, plumbed for thumb or hammer, 1 owner- plumbing contractor, min width 3'1", max width 3'11", True Zero Tail Swing makes working up against a wall easy & safe NOT GRAY MARKET

Used Case 430 Loader
#6601- Case 430 SCATBACK Loader- 4WD, sn# S524055, 1975, articulated with large material bucket & manure bucket, tires sound, 30 hp VH4D-G Wisconsin engine, weighs 3880#

Used Mustang Skid Steer
#6141- Mustang 2700V Skid Steer- sn# MMC02700D00041613, 2010, Yanmar tier III 84 hp engine, 2244 hrs, NEW 12x16.5 Tires, original paint, hand controls, 2 speed, hi flow hydraulics- 36.9 gpm, vertical lift design delivers extended reach and 130" lift height, higher than any competitor in its weight class- 99" Dump height, Lift, Cab w/heat/air, NO DOOR, All Works, 76" HD Grapple, 11.9 mph, Loader lifts 2700#, 5400# Tipping Load, weighs 8000#, 149"x69"x80"

Used Bobcat 763 Skidsteer
#6555- Bobcat 763 Skidsteer- AWD, sn# 512241359, 1996, 3620 hrs, 46hp, new paint & seat, cold start, Kubota 46 hp Diesel Engine, 1500# lift, new quick attach, plumbed with flat face couplers, 66" bucket, 10x16.5@50%, weighs 5368#

Used Case 1840 Skidsteer
#6545- Case 1840 Skidsteer- sn# JAF0064717, made 1989-2001, 4927 hrs, 50hp 4 cyl engine, 1350# tipping weight, runs & works a-1, NEW 10.0-16.5, NEW paint, weighs 5250#

Used Allmand TLB
#6449- Allmand TLB425ESL Tractor/Loader/Backhoe- 2wd, sn# 0068T42505, 2004,1362 hrs, Kubota D1105 25hp Diesel Engine, HST drive, 8'8" b.h. depth, .5 c.y bucket capacity, very durable, strong hydraulics, 4250#

Used Case 60 Trencher
#2944 Case 60 Trencher- sn# JAF0295998, 1998, Walk behind trencher, runs good, used last year, Honda 13 hp gas engine, wheels, digs 3 ft, weighs 720#.

NEW 72 inch Rototiller for Skid Steer

7ft Sweepster Broom
#4647- 7 ft Sweepster Broom, 3 pt, pto driven, new pto shaft, really nice

Skid Steer Buckets
New skid steer buckets. Ranging in size of 36" to 84". Starting price of $250.00 and up. Call for available sizes.

New SS Blank Plate
New Skid Steer Universal Blank Plate, Easy to weld on to buckets and other equipment to convert to skid steer style hookup

New BaumaLight S24 Stump Grinder for Skid steer
PRICE REDUCED!!! Making use of the high flow hydraulics available in today's Skid Steers, the quick attach Stump Blasters put the grinding in front of you. Mounted on the skid steer boom makes these Stump Blasters perfectly suited to take on stumps that are higher above ground. Flat face couplers ship standard on a S24. A 12v diverter valve allows the S24 to not only have a hydraulic drive but also a swing cylinder for a more refined cutting pass. This needle valve allows precise control of the cutting pass, and you grind more of the stump without re-positioning. 30-80 hp is recommended. 20-30 hydraulic GPM. 24" Rotor w/34 carbide steel bolt in teeth, no limit of cutting height above ground and 10" cutting depth below ground. 1 set of remote hydraulics needed.

New 66 in Root Grapple
#6438- New Tomahawk Root Grapple- 66" Single cylinder

New Stump Bucket
#6066- New Tree Stump Bucket

New- SEC C/N 60 28
#2387- New SEC C/N 60 28" bucket- Kobelco, Komatsu, Case, Takauchi 60-75 series Excavator, FITS: KOBELCO SK60, KOMATSU PC60, KOMATSU PC75, KOBELCO SK75, SUMITOMO SH60, IHI IHI65, IHI IHI55, TAKEUCHI TB80, CASE 9007

New Woods 7.19 Capacity Bucket for Case
#4868 New Woods 7.19 Capacity Bucket, sn#5996224-022356, mfg. 2002, model/stock family HD1 C580, pivot bushing D2296, curl bushing D2257, for Case

Used Skid Steer Bucket
#5920- Used Volvo 82" Bucket- HD

New Woods/Gannon 12" Bucket for JCB & Others
#4869- New Woods/Gannon 12" Bucket for JCB & Others, model# 5996612, sn#998770, 12"HD1JCB

New- Gannon 12" bucket, fits New Holland
#4873- New Gannon 12" bucket, manufactured by Woods, fits New Holland SN# SE0406G12P-9810690 Pivot/Curl Bushing #D22261

New Delfosud 12" bucket, fits New Holland
#4870- New Delfosud 12" bucket, model NH1, sn# 71855701, mfg 06-05-99

Used Bucket
#4880- Used Bucket for New Holland & others

Used John Deere Backhoe bucket
Used John Deere Backhoe bucket

Used- H&H Manufacturing LTD 24" Bucket
#4872- H&H Manufacturing, LTd 24" Bucket, model CAT416C 24HD, Used- sn# 18303, 7.5 capicity, hardware# 103202, 400#, mfg 07/98

Assorted Thumbs Available
Assorted Thumbs Available, many different sizes to choose from

New Excalibur X36 Universal Thumb Attachment
#3710- New Excalibur X36 Universal Thumb Attachment, fits 12,000#-16,000# machines(black one in photo): Case 9007, Cat E70B/307/308,Daewoo Solar 70/S70-3, Gehl 802, Hitachi EX60, JCB JS70, JSW BH30, JD 70/70D/80/190E, Kato HD140, Kobelco SK70R/SK60-4/SK60-3/SK90/SK80, Koehring 6605, Komatsu PC60/PC75UU/PC80, Link-Belt 1600Q/LS1600, Mitsubishi MS070, Nagano NS070, Takeuchi TB68/TB070/TB175/TB2200, Yanmar VIO70, And many Others.

New 9x24 Universal Thumb
New 9x24 Universal Thumb

New FB Fork Lift Booms
#4040- New FB Fork Lift Boom- a little faded from the sun, Extends 12ft, Alternate Hook Positions, Telescoping Booms, Restraining Chain with Grab Hook, Hand Pull at End for Easy Extension, Eye Hooks with Hook Latches, Boom Locking T-Pin, Fork Pocket 2-1/2"x7-1/2", Spacing 22-1/2", Maximum Capacity @ Hook Positions- lbs. 3'-6'=6000#, 7'=5000#, 8'=4200#, 9'=3500#, 10'-3000#, 11'=2700#, 12'=2500#

New Universal Mechanical Thumb
#4162- New 8x24 Universal Mechanical Thumb for mini excavators below 12000"

Used Bucket
#4874- Used Ditching bucket for Case backhoe

New Stone Buckets
#5553- New Versatech Stone Forks, skid steer style, 72", Good Quality (84" also available)

New SEC C/N60 36
#2444- New SEC C/N60 36" Excavator Bucket- Hitachi 110, 120, JD 490, Kobelco 120, Hundai 130, Daewoo 5130, Case 9010